Skip to content
VillaPools

Pool care · Dubai

Pool repair for existing pools in Dubai

When something on the pool stops working, the fix starts with finding out why. We repair the fittings, pipework and plant-room components of existing pools, and explain the cause as well as the cure.

Stainless-steel pool ladder fixed to a mosaic-tiled pool wall

Pool faults rarely arrive alone. A cracked skimmer lid lets debris into the pump basket; a sticking valve starves the filter; a failing union draws air into the system and leaves the water cloudy. Treating the symptom without the cause usually means a second call-out.

Our repair work covers the parts of an existing pool that wear, break or loosen over time — from fittings at the waterline to valves and pipework in the plant room. For powered equipment such as heaters, chlorinators and controls, see pool equipment repair; for pumps and filters, see pump and filter services.

Repairs we carry out

  • Skimmers and returns

    Replacing cracked lids, weirs, baskets and return eyeballs, and resealing loose fittings.

  • Ladders and handrails

    Re-securing loose ladders and rails and replacing worn treads and anchors.

  • Pool lights

    Replacing failed lamps and seals in existing light fittings, and tracing tripping lighting circuits.

  • Valves and unions

    Freeing or replacing seized valves and resealing leaking unions in the plant room.

  • Plant-room pipework

    Repairing accessible pipework leaks and replacing damaged sections.

  • Small surface repairs

    Re-fixing individual loose tiles or coping stones. Full retiling or resurfacing is renovation work and outside our scope.

Is the water level dropping?

Pools in Dubai lose a noticeable amount of water to evaporation, especially in summer. Before assuming a leak, a simple comparison helps:

  1. Stand a bucket on the pool step, fill it to the same level as the pool water and mark both levels.
  2. Leave the pump running on its normal schedule for a day, then compare how far each level has fallen.
  3. If the pool falls clearly more than the bucket, repeat with the pump switched off and note the difference.
  4. Tell us both results when you get in touch. They show whether the loss is likely to be evaporation, and whether it is linked to the circulation system.

Common signs that something needs repair

  • Air bubbles from the returns

    Usually air drawn in on the suction side — a lid seal, union or valve worth checking.

  • Damp floor in the plant room

    A slow leak at a union, valve or pump seal that will worsen if left.

  • A light that keeps tripping

    Water in the fitting or a failing seal. Switch the circuit off and leave it off until it is checked.

  • Loose or rattling fittings

    Ladders, rails and skimmer parts that move under load should be secured before someone is hurt.

Common questions

Can you repair a pool light without draining the pool?

Many fittings are designed with enough cable to be lifted onto the deck for re-lamping and resealing. Where that is not possible, we explain the options before starting.

Do you retile pools?

No. We re-fix individual loose tiles and coping stones as repairs, but full retiling, resurfacing and structural work are renovation projects and outside what VillaPools does.

Do you repair pools you do not maintain?

Yes. Repairs are available on their own, and we will mention anything else we notice while we are there.

Ask about pool repair

Tell us where the pool is, what you are seeing and roughly how big it is. A photograph of the pool and the plant room helps.

  • Phone

    +971 56 181 0106

    Talk through what the pool is doing and book a time for us to see it.

  • WhatsApp

    Send a message

    The easiest way to send photographs of the pool and plant room.

Next step

Want your pool looked after properly?

Send a photograph and a short description. We will tell you what we would check first and arrange a visit.

PhoneWhatsApp us